Skip to main content
Start of main content

4 reasons why 3D modeling and BIM are the future of infrastructure design

February 25, 2021

By John Barone

Transportation projects can adopt many of the latest BIM technologies the buildings industry is using—saving money and improving infrastructure

Twenty years into the 21st century we’re still using outdated design technology for critical infrastructure projects. Building information modeling (BIM)—basically 3D engineered models—is widely adopted in the buildings industry. If you don’t design with BIM for a building, you are old school—and not in a good way.

BIM is a mature design methodology that shows enormous potential for improving the way we deliver transportation projects. But still, the transportation industry is lagging.

The need for BIM is clear. Our transportation structures are aging—in some cases, they are significantly past their “expiration date.” And our population, especially in urban areas, continues to grow and put more strain on the old infrastructure. This combination of challenges means that now is the time for more efficient and cost-effective technologies to build, maintain, monitor, and repair roads, bridges, and other infrastructure. 

A 3D cross-section model of the Red Purple Bypass and North Mainline for the Red and Purple Line Modernization Program in Chicago. 3D digital models provide much more detail, fewer errors, increased safety, and significant savings compared with a traditional 2D paper-only set of plans.

Exit the old fashioned 2D paper-only set of plans and their limitations.

Enter 3D digital models—and even 4D and 5D—with much more detail, fewer errors, increased safety, and significant savings. Digital models offer four significant improvements over the existing industry standard.

1. Better cost predictability—and a look at 4D and 5D

We’ve been designing roads, bridges, and other projects for decades using 2D plan sets. It works. Look around, there are lots of roads and bridges.

But it doesn’t work as well as it could. Look at those projects again. How often is there a disconnect between what’s on paper and what gets built? When you’re cutting a cross section every 50 feet, there is a lot of room for misinterpretation. Honestly, it’s a bit of a guessing game between the designer and the contractor. And the client sometimes loses.

With digital modeling, you know exactly what to expect.

For example, when modeling a new highway, you can see every element and how they interact, and you have access to all the information needed for decision-making. Digital tools allow you to say, “These are the 50 things I want to quantify” and then you run the numbers. It spits out the volume of concrete, number of signposts, how many light poles—everything. As a side benefit, it still produces the traditional 2D plan sets, as required by our clients.

And when we add in the 4D (schedule) and 5D (cost) elements of the digital model it becomes even more valuable.

Naturally, scheduling and budgeting are two major factors in the success of projects, especially mega projects like two I recently worked on—the Red and Purple Line Modernization Program in Chicago and the $1.9 billion Long Island Railroad Expansion project in New York.

The 4D aspect of a digital model allows construction scheduling to be an integral part of the plan. You can see when everything is going to be built—in some cases right down to installation of signs or striping of the roads.

For 5D, we integrate costs into the project. The client and contractor will know when materials are due to arrive on site, when they will need to pay for the materials, when the invoices will come. This helps eliminate cost overruns. 

A rendering from a 3D model for a Port Authority of New York & New Jersey bridge replacement at the Lincoln Tunnel in New Jersey.

2. Fewer errors—3D models make it easy to spot mistakes

There are few things more heartbreaking on a project than having concrete poured, only to tear it back up because of an error. Digital models greatly reduce errors, ultimately saving time and money.

When mistakes are corrected in the field, they can be exponentially more expensive than if we had fixed those “errors” in the design phase.

With a 3D model, designers immediately see if something looks wrong. The digital models naturally provide clash detection because they show the full project. If pipes intersect one another or hit a bridge footing, it’s immediately visible in 3D. 2D plans simply don’t show the conflicts.

And traditional plan sets usually include cross sections every 50 or 100 feet. That requires the contractor to interpret the plans in between the cross sections. A 3D model is basically one giant cross section, providing a level of detail impossible in the 2D world.

3. Better understanding—and happier stakeholders

Wouldn’t it be great to walk through a project before a single cubic foot of concrete has been poured? Of course. And that’s what a digital model provides.

The digital model can be used with virtual reality (VR) or augmented reality (AR) to show the project before anything is built. AR and VR enhance communication and assist in the integration of ideas. And it helps simplify the process—especially with stakeholders of various levels of understanding.

Now is the time for more efficient and cost-effective technologies to build, maintain, monitor, and repair roads, bridges, and other infrastructure.

It’s an absolute game-changer for public involvement. The public often has a difficult time visualizing project concepts by looking at engineering drawings. But we can take our models to a public meeting and show exactly what the project will look like when finished. Our client doesn’t want surprises at the end of the project, and the community certainly doesn’t want an eyesore. Models help us see what it will look like. How amazing it is to have someone virtually stand in their own driveway and look up and down the finished road. They don’t have to guess what it will look like—they can see it for themselves.

During the COVID-19 pandemic, we used an Oculus Quest headset and had five people stand inside the model simultaneously on one of our project sites. That sort of visualization leads to better and more comprehensive design. As a design team, we were able to fix a variety of issues before construction started.

And it’s great for the client because they don’t have to guess how it’s going to look. And the contractor can’t say they didn’t understand. They’ve seen the full project before ever starting construction.

An example of 4D modeling for underground utilities as part of the Terminal C Roadways project at Boston Logan International Airport in Boston, Massachusetts. 4D models add the project schedule to the 3D model. The project is part of Massport’s Logan Forward Program.

4. Lower cost, better product, and safer construction

3D model designs cost more to create than traditional designs. Maybe up to 10% more in the design fee. And that sounds like a lot, until you realize the expected savings on the construction bottom line is about 4%.

That 4% on a $2 billion project is $80 million. The design might cost 10% more, but the savings in construction is so significant that the higher design costs are essentially drops in the bucket. By having a complete 3D model, there are fewer change orders. Fewer change orders mean major savings—both in dollars and in time.

Beyond cost savings, the final project will be more precise and safety is increased.

Precision comes from automating many functions, including placing subgrade, base course, pavement, and using steamrollers. Honestly, the more human elements we can remove from the process, the less room there is for error. Surveyors are humans, too. Sometimes mistakes mean we grade the road incorrectly—then we must fix it. Automation, which comes from the 3D model, is better.

Digital modeling played a key role in the success of the State Highway 288 Toll Lanes project in Houston, Texas. The 10.3-mile roadway provides a more direct commute in one of the fastest-growing metro areas in the US.

The future is 3D

In today’s tech-heavy world, the traditional paper-only plan sets are a throwback to an older world. And, honestly, it’s time for advancement. With BIM/3D modeling for infrastructure projects we can provide clients, contractors, and the project neighbors a better highway, road, bridge, or other infrastructure, and for less cost.

It’s exciting to see—and we can virtually see these projects—where modeling will take our industry. With 3D models, we set ourselves up for future improvements, such as embedding sensors in a bridge to track how it’s performing, creating digital as-builts, monitoring for CO2 levels—the options are almost endless.

3D digital models give us much more detail, fewer errors, significant savings, and a safer worksite. It’s time for the digital future to become today’s reality.

  • John Barone

    As digital practice manager, John leverages new technologies like parametric, computational, and generative design to help better deliver work, faster. His team also uses animation, visualization, and virtual and augmented reality to help win work.

    Contact John
End of main content
To top
Run Modes: s7connect,crx3,nosamplecontent,publish,crx3tar
Build Version: 2.5.0.8
Build Date: 2022-43-28 08:43:59